- How to Install Woven Blinds
-
1. Decide whether the blind will be placed inside or outside the recess, depending on the option selected upon ordering.
-
2. Using a pencil, mark the position of the brackets in accordance to your requirements: inside or outside the recess, making sure that they are placed at approximately 25 mm from either end of the blind.
-
3. Fix the brackets to the marked place using the screws provided upon delivery.
-
Note for inside the recess installation, use the top holes at the top of the bracket while for outside recess placement, use the holes at the back.
-
4. Fitting the head rail against the brackets.
-
After removing the wing nuts and washers from the bracket, align the slits of the head rail with the bolts and place it inside the brackets. Using the washers and wing nuts, fix the head rail into place.
-
5. Installing the cord cleat
-
Position the cord cleat at approximately 10 cm from the right side of the blind making sure that it is about at the middle of the drop of the blind and secure the cleat with screws.
- Affordable
- Online Shopping
- Accepted Cards
